INKFUSE / EVOLUTION
One production platform. Four configurations. Choose the output and colour capability you need today, with a clear route to evolve tomorrow.
Professional 60cm DTF printer systems.
ONE PLATFORM
FOUR POSSIBILITIES
9-COLOUR
CMYKW
CMYKW
9-COLOUR
A platform that grows with you.
ONE RANGE. FOUR PRODUCTION LEVELS.
Every Evolution DTF Printer is supplied as a complete DTF production system, with its inline oven, software, installation and hands-on training. The right model comes down to your balance of throughput, colour capability and room to grow.
CHOOSE YOUR CONFIGURATION
Compare the whole range at a glance.
EXPANDED COLOUR
Expanded colour. An accessible starting point.
linear m/hr
6-pass production
Printheads
3 × Epson i3200
Ink configuration
CMYKORGBW · 9 colours
Included oven
Short inline oven
For businesses that want a wider colour gamut without stepping up to the six-head system.
Complete system
ex VAT
EVERYDAY PRODUCTION
A step up in everyday output.
linear m/hr
6-pass production
Printheads
4 × Epson i3200
Ink configuration
CMYKW · 5 colours
Included oven
Short inline oven
For growing production teams focused on output and efficient CMYKW printing.
Complete system
ex VAT
HIGHEST THROUGHPUT
More capacity from every production line.
linear m/hr
6-pass production
Printheads
5 × Epson i3200
Ink configuration
CMYKW · 5 colours
Included oven
Long inline oven
The highest-throughput CMYKW configuration in the Evolution range.
Complete system
ex VAT
OUTPUT + EXPANDED COLOUR
Expanded colour meets serious capacity.
linear m/hr
4 pass · approx. 25 m/hr at 6 pass
Printheads
6 × Epson i3200
Ink configuration
CMYKORGBW · 9 colours
Included oven
Long inline oven
For teams that need higher production capacity alongside dedicated Orange, Red, Green and Blue channels.
Complete system
ex VAT
Speeds are quoted in linear metres per hour at the stated pass setting. Evolution 6’s 4-pass figure is not a like-for-like comparison with the other models’ 6-pass figures.
Maximum print width
Maximum resolution
Printer weight
Printer W × D, mm
THE IMPORTANT DISTINCTION
The model number is not a speed ranking. Evo 5H leads on throughput; Evo 6H combines higher output with expanded-gamut colour.
Evolution 5 · CMYKW
40 linear m/hr at 6 pass
Evolution 6 · CMYKORGBW
35 m/hr at 4 pass
Approx. 25 m/hr at 6 pass
INLINE POWDER & CURING SYSTEM
Film feeds directly from printer to oven, with powder application, excess removal and curing handled in one continuous workflow.
Integrated filtration removes the need to duct the oven through an external wall, giving you more flexibility when positioning the production line.
Removing the exposed pre-heating plate helps reduce film distortion before it reaches the oven, reducing the associated risk of head strikes.
Automatic powder application
Automatic excess powder removal
Infrared + hot-air curing
Digital temperature control
Integrated filtration
Automatic take-up
Included with Evo 3H & 4H
1600 × 840 × 1120 mm · 228 kg
Standard UK plug
Included with Evo 5H & 6H
2250 × 840 × 1120 mm · 305 kg
32A single-phase supply
WHY NINE COLOUR?
Evo 3H and 6H adda a dedicated Orange, Red, Green and Blue channels to existing CMYK and White setups.Â
The expanded gamut is designed for vibrant output and demanding brand colours across sportswear, workwear, fashion, merchandise and trade DTF.
BUY FOR TODAY. EVOLVE FOR TOMORROW.
Eligible Evolution systems can gain printhead capacity and, where applicable, expanded-colour capability without replacing the complete DTF printer.
TO
£4,800 + travel*
TO
£2,800 + travel*
TO
£3,800 + travel*
To
£1,800 + travel
*Includes a £1,000 + VAT short-to-long oven exchange allowance, subject to the existing oven being returned in good condition at trade in. All upgrade prices exclude VAT. Engineer travel is £0.60 per mile for the round trip.
A COMPLETE DTF PRODUCTION SYSTEM
Every Evolution bundle is installed at your premises and backed by practical support from a team that runs DTF equipment commercially.
01
Your chosen Evolution printer and the appropriate short or long curing oven.
02
PC, monitor, mouse, keyboard and Digital Factory (CADLink) software.
03
Starter ink, 5kg powder and a 60cm × 100m roll of film.
04
Delivery and on-site installation of your production system.
05
4–5 hours of practical hands on operator training.
06
12-month warranty and WhatsApp support from the Inkfuse DTF team.
Extended warranty options available — enquire for current terms and pricing.
LET’S TALK DTF PRODUCTION
Tell us about your output, growth plans and colour requirements. We’ll help you choose a configuration and confirm availability, lead times and your complete system quotation.
